Cubicle System 30 FN

The Cubicle System 30 FN is ideal for all wet areas with an emphasis on elegant design. The flush design not only looks good, but also makes it easy to clean the panel surfaces.

The system consists of 24 mm thick high-strength water-resistant PU-core panels with a double-sided 3 mm laminate covering that is very robust and scratch-resistant. The panel edges are protected by 3 mm thick polypropylene edging. The edges are not glued, but precision-welded using the laserTec procedure. This means that they are particularly resistant to moisture and look as if made from a single mould.

Standard features of this design series include handle sets out of robust and hygienic nylon. The doors of the cubicles are all fitted with stainless steel hinges that can withstand many million closing cycles without wear. Good stability is guaranteed by aluminium supports with a diameter of 20 mm that are enclosed in colour-matched nylon covers. Also included at no extra charge: A coat hook and a door buffer for each cubicle.

Cubicle System 30 FN
Cubicle System 30 FN in grey. Elegant flush design with invisible door stop profile. Suitable for wet areas.
Cross section of the partition wall
Cross section of the 24 mm thick PU panel with double-sided 3 mm laminate covering

Standard features

23 mm nylon handle set
Grip friendly and easy to clean: Nylon handle set
Stainless steel hinge for cubicle system doors
Virtually indestructible: 3-rolls stainless steel hinges
20 mm aluminium support with height-adjustable nylon rosette
Ensuring stability: Stable aluminium support with nylon cover
Hook and buffer for cubicle systems
Nylon coat hook and door buffer

Perfection down to the last detail

Corner joint with softline profile
Looks good: Corner joint with softline profile
Wall connection
No rivets or screws: Outside wall fixing

Design versions

Our cubicle systems are available in two heights as per DIN 18100 and DIN 18101. This allows for a design that is compatible with the overall spatial arrangement and door dimensions.

  • System height: 2015 mm (2155 mm for the suspended version)
  • Ground clearance: 150 mm
  • Clearance height: 1995 mm

or

  • System height: 2155 mm (2295 mm for the suspended version)
  • Ground clearance: 150 mm
  • Clearance height: 2135 mm

There are different versions that can be used for closing off the cubicles at the top or bottom in order to fully meet your specific design and functional requirements.

  • Floating: Here, the feet are not attached to the front end, but positioned 150 mm inwards. This results in a floating appearance and makes it easier to clean the front.
  • Suspended: A 160 mm high cover profile at the top of the cubicle allows for the installation of cubicles with fewer support legs. This means: Obstacle-free cleaning of the floor.
  • Without ground clearance: Floor mounting without legs is ideal for preventing climbing underneath cubicles.
  • Solid panel top unit: Prevents climbing over cubicles and allows for a fully lockable cabin, e.g. for the safe storage of cleaning equipment.
  • Acrylic glass top unit: Similar in function to the solid panel top unit, but translucent. Allows for more lighting flexibility in the sanitary room.